Experimentelle Untersuchung elastokalorischer Kühlprozesse : konvektive Thermodynamik, latente Wärme und Materialzustandsüberwachung

Im Bereich der Kühltechnik stellt die Elastokalorik eine umweltfreundliche und effiziente Alternative zur konventionellen Kältekompression dar. Nach weitreichender Grundlagenforschung wurden in den letzten Jahren erste elastokalorische Kühlsysteme entwickelt, die unter anderem auf direkter Luftkühlung basieren. Um einen Beitrag zur Weiterentwicklung dieser Systeme zu leisten, beschäftigt sich diese Arbeit im ersten Schritt mit der experimentellen Untersuchung der thermodynamischen Prozesse zur Luftkühlung. In diesem Zusammenhang wird außerdem ein neuer, experimenteller Ansatz zur Messung der latenten Wärme des Materials, die maßgeblich für die Kühlleistung der elastokalorischen Systeme verantwortlich ist, vorgestellt. Weiterhin ist die Lebensdauer des verwendeten Materials ein essenzieller und kritischer Punkt für die Systementwicklung. Vor diesem Hintergrund beinhaltet diese Arbeit eine Analyse der Materiallebensdauer wie auch der Ausfallmechanismen. Hierzu wurde ein neuer Langzeitprüfstand konzipiert, realisiert und charakterisiert, der es ermöglicht, mehrere Materialproben parallel hinsichtlich ihrer Lebensdauer zu analysieren. Abschließend werden datengetriebene Ansätze zur Überwachung des Materialzustands mithilfe von Impedanz- und Widerstandsmessung untersucht und die Ergebnisse vorgestellt. Dies ermöglicht unter Verzicht auf teure Messtechnik die Überwachung des Materialtrainings sowie die Wartungsplanung bei drohendem Materialversagen.Elastocaloric cooling is an environmentally friendly and energy efficient alternative for conventional compression-based cooling systems. After intensive fundamental research in recent years, first elastocaloric cooling devices have recently been developed, which are partly based on direct air cooling. To contribute to the development of these systems, this thesis addresses an experimental investigation of the thermodynamic processes regarding air cooling beginning a first step. In this context a novel experimental approach is presented allowing the determination of the latent heat of the material which contributes greatly to the cooling power of elastocaloric systems. For the development of elastocaloric cooling systems, the working life of the material is an essential and critical point. Therefore, this thesis also contains an analysis of the material lifetime as well as the failure mechanisms. For these studies, a long-term test setup was developed, realized, and characterized, which offers the opportunity to analyze multiple material samples at the same time to determine their working life. Finally, data-driven approaches to monitor the material condition are examined with the help of impedance and resistance measurement and the results are presented. This enables monitoring of material training as well as maintenance planning in the event of impending material failure, without the need for expensive measurement technology.DFG Priority Program SPP 1599 "Ferroic Cooling

A unified approach to thermo-mechano-caloric-characterization of elastocaloric materials

This paper presents a novel approach to characterizing the relevant mechanical, thermal and caloric properties of elastocalorics material in a single testing device. Usually, tensile experiments are performed to determine the rate- and process-depending stress/strain behavior of nickel-titanium-based shape memory alloys and potentially other elastocaloric materials made from metallic alloys. These tests are relevant for, e.g., characterization of hysteresis properties and subsequent calculation of mechanical work input. In addition, simultaneous observation with an infrared camera is useful to understand temperature evolution and maximum temperature changes achievable during the loading/unloading process. Characterization of the caloric properties of the materials determines latent heats and, together with the mechanical work, also the material coefficient of performance. It is typically carried out via differential scanning calorimetry (DSC), which is performed in a separate device and requires a second experiment with different types of samples. Furthermore, DSC measurements do not reflect the way mechanically induced phase transformations trigger the release and absorption of latent heats as it is the case for elastocalorics. In order to provide a more consistent understanding of the relevant elastocaloric material properties, we here present a novel method that (a) allows for a systematic determination of load-dependent latent heats and (b) introduces a comprehensive testing setup and suitable testing routine to determine the mechanical, thermal and caloric parameters in the same experimental device and with the same sample, thus greatly simplifying the overall procedure

Development of a shape memory based air conditioning system

The following contribution presents a new concept of an air conditioning device based on the elastocaloric cooling effect of shape memory alloys (SMA’s). This technology provides an energy efficient and environment friendly alternative to conventional vapor compression based cooling principles. Starting from the thermodynamic investigation of the elastocaloric cooling process, a continuous operating elastocaloric air cooling device is developed. The device enables an optimized thermodynamic process control under various operating conditions as well as large temperature spans. This work presents the design process of such a system starting from SMA based heat engines to a thermodynamically optimized design of an elastocaloric air conditioning device

The BepiColombo Laser Altimeter (BELA) during Near-Earth Commissioning Phase (NECP)

The ESA/JAXA joint mission BepiColombo to Mercury was launched successfully on October 20, 2018 (UTC) from Kourou, French Guiana. Currently BepiColombo is on its nominal 7-years cruise to the innermost planet. BepiColombo consists of two spacecraft, the Mercury Planetary Orbiter (MPO) and the Mercury Magnetospheric Orbiter (MMO), both targeted for different orbits around Mercury after arrival in December 2025. The BepiColombo Laser Altimeter (BELA) is one of ten payloads on the MPO. After launch the spacecraft and the instruments entered the Near-Earth Commissioning Phase (NECP), including a first switch-on of BELA on November24, 2018. Here we report on the status of the instrument based on the analysis of NECP data and on data from a second switch-on, planned for June 2019

Space-qualified laser system for the BepiColombo Laser Altimeter

The space-qualified design of a miniaturized laser for pulsed operation at a wavelength of 1064 nm and at repetition rates up to 10 Hz is presented. This laser consists of a pair of diode-laser pumped, actively q-switched Nd:YAG rod oscillators hermetically sealed and encapsulated in an environment of dry synthetic air. The system delivers at least 300 million laser pulses with 50 mJ energy and 5 ns pulse width (FWHM). It will be launched in 2017 aboard European Space Agency’s Mercury Planetary Orbiter as part of the BepiColombo Laser Altimeter, which, after a 6-years cruise, will start recording topographic data from orbital altitudes between 400 and 1500 km above Mercury’s surface

The Ganymede Laser Altimeter (GALA) for the Jupiter Icy Moons Explorer (JUICE): Mission, science, and instrumentation of its receiver modules

The Jupiter Icy Moons Explorer (JUICE) is a science mission led by the European Space Agency, being developed for launch in 2023. The Ganymede Laser Altimeter (GALA) is an instrument onboard JUICE, whose main scientific goals are to understand ice tectonics based on topographic data, the subsurface structure by measuring tidal response, and small-scale roughness and albedo of the surface. In addition, from the perspective of astrobiology, it is imperative to study the subsurface ocean scientifically. The development of GALA has proceeded through an international collaboration between Germany (the lead), Japan, Switzerland, and Spain. Within this framework, the Japanese team (GALA-J) is responsible for developing three receiver modules: the Backend Optics (BEO), the Focal Plane Assembly (FPA), and the Analog Electronics Module (AEM). Like the German team, GALA-J also developed software to simulate the performance of the entire GALA system (performance model). In July 2020, the Proto-Flight Models of BEO, FPA, and AEM were delivered from Japan to Germany. This paper presents an overview of JUICE/GALA and its scientific objectives and describes the instrumentation, mainly focusing on Japan’s contribution

The CHEOPS mission

The CHaracterising ExOPlanet Satellite (CHEOPS) was selected in 2012, as the first small mission in the ESA Science Programme and successfully launched in December 2019. CHEOPS is a partnership between ESA and Switzerland with important contributions by ten additional ESA Member States. CHEOPS is the first mission dedicated to search for transits of exoplanets using ultrahigh precision photometry on bright stars already known to host planets. As a follow-up mission, CHEOPS is mainly dedicated to improving, whenever possible, existing radii measurements or provide first accurate measurements for a subset of those planets for which the mass has already been estimated from ground-based spectroscopic surveys and to following phase curves. CHEOPS will provide prime targets for future spectroscopic atmospheric characterisation. Requirements on the photometric precision and stability have been derived for stars with magnitudes ranging from 6 to 12 in the V band. In particular, CHEOPS shall be able to detect Earth-size planets transiting G5 dwarf stars in the magnitude range between 6 and 9 by achieving a photometric precision of 20 ppm in 6 hours of integration. For K stars in the magnitude range between 9 and 12, CHEOPS shall be able to detect transiting Neptune-size planets achieving a photometric precision of 85 ppm in 3 hours of integration. This is achieved by using a single, frame-transfer, back-illuminated CCD detector at the focal plane assembly of a 33.5 cm diameter telescope. The 280 kg spacecraft has a pointing accuracy of about 1 arcsec rms and orbits on a sun-synchronous dusk-dawn orbit at 700 km altitude. The nominal mission lifetime is 3.5 years. During this period, 20% of the observing time is available to the community through a yearly call and a discretionary time programme managed by ESA.Comment: Submitted to Experimental Astronom

Large expert-curated database for benchmarking document similarity detection in biomedical literature search

Document recommendation systems for locating relevant literature have mostly relied on methods developed a decade ago. This is largely due to the lack of a large offline gold-standard benchmark of relevant documents that cover a variety of research fields such that newly developed literature search techniques can be compared, improved and translated into practice. To overcome this bottleneck, we have established the RElevant LIterature SearcH consortium consisting of more than 1500 scientists from 84 countries, who have collectively annotated the relevance of over 180 000 PubMed-listed articles with regard to their respective seed (input) article/s. The majority of annotations were contributed by highly experienced, original authors of the seed articles. The collected data cover 76% of all unique PubMed Medical Subject Headings descriptors. No systematic biases were observed across different experience levels, research fields or time spent on annotations. More importantly, annotations of the same document pairs contributed by different scientists were highly concordant. We further show that the three representative baseline methods used to generate recommended articles for evaluation (Okapi Best Matching 25, Term Frequency-Inverse Document Frequency and PubMed Related Articles) had similar overall performances. Additionally, we found that these methods each tend to produce distinct collections of recommended articles, suggesting that a hybrid method may be required to completely capture all relevant articles. The established database server located at https://relishdb.ict.griffith.edu.au is freely available for the downloading of annotation data and the blind testing of new methods. We expect that this benchmark will be useful for stimulating the development of new powerful techniques for title and title/abstract-based search engines for relevant articles in biomedical research.Peer reviewe

Finishing the euchromatic sequence of the human genome

The sequence of the human genome encodes the genetic instructions for human physiology, as well as rich information about human evolution. In 2001, the International Human Genome Sequencing Consortium reported a draft sequence of the euchromatic portion of the human genome. Since then, the international collaboration has worked to convert this draft into a genome sequence with high accuracy and nearly complete coverage. Here, we report the result of this finishing process. The current genome sequence (Build 35) contains 2.85 billion nucleotides interrupted by only 341 gaps. It covers ∼99% of the euchromatic genome and is accurate to an error rate of ∼1 event per 100,000 bases. Many of the remaining euchromatic gaps are associated with segmental duplications and will require focused work with new methods. The near-complete sequence, the first for a vertebrate, greatly improves the precision of biological analyses of the human genome including studies of gene number, birth and death. Notably, the human enome seems to encode only 20,000-25,000 protein-coding genes. The genome sequence reported here should serve as a firm foundation for biomedical research in the decades ahead

Reliability and accuracy of single-molecule FRET studies for characterization of structural dynamics and distances in proteins

Single-molecule Förster-resonance energy transfer (smFRET) experiments allow the study of biomolecular structure and dynamics in vitro and in vivo. We performed an international blind study involving 19 laboratories to assess the uncertainty of FRET experiments for proteins with respect to the measured FRET efficiency histograms, determination of distances, and the detection and quantification of structural dynamics. Using two protein systems with distinct conformational changes and dynamics, we obtained an uncertainty of the FRET efficiency ≤0.06, corresponding to an interdye distance precision of ≤2 Å and accuracy of ≤5 Å. We further discuss the limits for detecting fluctuations in this distance range and how to identify dye perturbations. Our work demonstrates the ability of smFRET experiments to simultaneously measure distances and avoid the averaging of conformational dynamics for realistic protein systems, highlighting its importance in the expanding toolbox of integrative structural biology